Netgear STM150 User Manual download pdf (Page 371)

100

101

Virtual Private Networking Using SSL Connections

371

ProSecure Unified Threat Management (UTM) Appliance

4. Click Apply to save your settings. The new configuration is added to the Defined Resource

Addresses table.

To delete a configuration from the Defined Resource Addresses table, click the Delete table

button to the right of the configuration that you want to delete.

Configure User, Group, and Global Policies

You can define and apply user, group, and global policies to predefined network resource

objects, IP addresses, address ranges, or all IP addresses, and to different SSL VPN

services. A specific hierarchy is invoked over which policies take precedence. The UTM

policy hierarchy is defined as follows:

• User policies take precedence over all group policies.

• Group policies take precedence over all global policies.

• If two or more user, group, or global policies are configured, the most specific policy takes

precedence.

For example, a policy that is configured for a single IP address takes precedence over a

policy that is configured for a range of addresses. And a policy that applies to a range of IP

addresses takes precedence over a policy that is applied to all IP addresses. If two or more

IP address ranges are configured, then the smallest address range takes precedence. Host

names are treated the same as individual IP addresses.

Network resources are prioritized just like other address ranges. However, the prioritization is

based on the individual address or address range, not the entire network resource.

Object Type From the drop-down list, select one of the following options:

• IP Address. The object is an IP address. You need to enter the IP address

or the FQDN in the IP Address / Name field.

• IP Network. The object is an IP network. You need to enter the network IP

address in the Network Address field and the network mask length in the

Mask Length field.

IP Address / Name Applicable only when you select IP Address as the

object type. Enter the IP address or FQDN for the

location that is permitted to use this resource.

Network Address Applicable only when you select IP Network as the

object type. Enter the network IP address for the

locations that are permitted to use this resource.

Object Type

(continued)

Mask Length Applicable only when you select IP Network as the

object type. As an option, enter the network mask (0–31)

for the locations that are permitted to use this resource.

Port Range / Port Number A port or a range of ports (0–65535) to apply the policy to. The policy is applied

to all TCP and UDP traffic that passes on those ports. Leave the fields blank to

apply the policy to all traffic.

Table 96. Resources screen settings to edit a resource (continued)

Setting Description

1 2 ... 366 367 368 369 370 371 372 373 374 375 376 ... 703 704

Comments to this Manuals

No comments

Netgear STM150 User Manual Page 371

Comments to this Manuals

Related products and manuals for Routers Netgear STM150