Netgear STM150 User Manual download pdf (Page 311)

100

101

Virtual Private Networking Using IPSec, PPTP, or L2TP Connections

311

ProSecure Unified Threat Management (UTM) Appliance

2. Complete the fields and select the radio buttons as explained in the following table:

3. Click Apply to save your settings.

Note: You can select the RADIUS authentication protocol (PAP or CHAP)

on the Edit IKE Policy screen or Add IKE Policy screen (see

Configure XAUTH for VPN Clients on page 309).

Table 76. RADIUS Client screen settings

Setting Description

Primary RADIUS Server

To enable and configure the primary RADIUS server, select the Yes radio button, and then enter the

settings for the three fields to the right. The default setting is that the No radio button is selected.

Primary Server IP Address The IP address of the primary RADIUS server.

Secret Phrase A shared secret phrase to authenticate the transactions between the client

and the primary RADIUS server. The same secret phrase needs to be

configured on both the client and the server.

Primary Server NAS

Identifier

The primary network access server (NAS) identifier that needs to be present

in a RADIUS request.

Note: The UTM functions as an NAS, allowing network access to external

users after verification of their authentication information. In a RADIUS

transaction, the NAS needs to provide some NAS identifier information to the

RADIUS server. Depending on the configuration of the RADIUS server, the

UTM’s IP address might be sufficient as an identifier, or the server might

require a name, which you need to enter in this field.

Backup RADIUS Server

To enable and configure the backup RADIUS server, select the Yes radio button, and then enter the

settings for the three fields to the right. The default setting is that the No radio button is selected.

Backup Server IP Address The IP address of the backup RADIUS server.

Secret Phrase A shared secret phrase to authenticate the transactions between the client

and the backup RADIUS server. The same secret phrase needs to be

configured on both the client and the server.

Backup Server NAS

Identifier

The backup network access server (NAS) identifier that needs to be present

in a RADIUS request.

Note: See the note earlier in this table for the Primary Server NAS Identifier.

Connection Configuration

Time out period The period in seconds that the UTM waits for a response from a RADIUS

server.

Maximum Retry Counts The maximum number of times that the UTM attempts to connect to a

RADIUS server.

1 2 ... 306 307 308 309 310 311 312 313 314 315 316 ... 703 704

Comments to this Manuals

No comments

Netgear STM150 User Manual Page 311

Comments to this Manuals

Related products and manuals for Routers Netgear STM150