Netgear STM150 User Manual download pdf (Page 590)

100

101

Wireless Network Module for the UTM9S and UTM25S

590

ProSecure Unified Threat Management (UTM) Appliance

SSID The wireless network name (SSID) for the wireless profile. The default SSID

name is netgear-1. You can change this name by entering up to

32 alphanumeric characters. Make sure that additional SSIDs have unique

names.

Broadcast SSID Select the check box to enable the wireless profile to broadcast its SSID,

allowing wireless clients that have a null (blank) SSID to adopt the wireless

profile’s SSID. To prevent the SSID from being broadcast, clear the check

box.

Security

Note: Before you configure security, you might want to read Wireless Data

Security Options on page 584.

Specify the wireless security by making a selection from the drop-down list:

• OPEN. This is the default setting. An open system has no authentication

and no encryption, and therefore no security configuration. However, you

can use an open system with encryption. To do so, select WEP from the

Security drop-down list. In the WEP Index and Keys section of the

screen, take the following steps:

- Select Open System authentication.

- Select the encryption.

- Enter a passphrase and generate a key, or enter a key manually.

• WEP. To configure WEP, take the following steps in the WEP Index and

Keys section of the screen:

- Select Shared Key authentication.

- Select the encryption.

- Enter a passphrase and generate a key, or enter a key manually.

• WPA. To configure WPA, select the encryption and authentication. The

remaining configuration depends on the selected authentication:

- For WPA-PSK, select a password.

- For WPA with RADIUS, configure the RADIUS server settings.

- For WPA with PSK+RADIUS, select a password and configure the

RADIUS server settings.

• WPA2. To configure WPA2, select the encryption and authentication. The

remaining configuration depends on the selected authentication:

- For WPA2-PSK, select a password.

- For WPA2 with RADIUS, configure the RADIUS server settings. As an

option, you can enable RADIUS preauthentication.

- For WPA2 with PSK+RADIUS, select a password and configure the

RADIUS server settings. As an option, you can enable RADIUS

preauthentication.

• WPA+WPA2. To configure WPA, select the encryption and

authentication. The remaining configuration depends on the selected

authentication:

- For WPA+WPA2 with PSK, select a password.

- For WPA+WPA2 with RADIUS, configure the RADIUS server settings.

- For WPA+WPA2 with PSK+RADIUS, select a password and configure

the RADIUS server settings.

Table 151. Add Wireless Profiles screen settings (continued)

Field Description

1 2 ... 585 586 587 588 589 590 591 592 593 594 595 ... 703 704

Comments to this Manuals

No comments

Netgear STM150 User Manual Page 590

Comments to this Manuals

Related products and manuals for Routers Netgear STM150