Netgear PROSAFE FVS338 User Manual Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 178
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
FVS338 ProSafe VPN Firewall 50 Reference Manual
2-2 Connecting the FVS338 to the Internet
v1.0, September 2006
To log in to the VPN firewall:
1. Open a Internet Explorer, Netscape® Navigator, or Firefox browser. In the browser window,
enter http://192.168.1.1 in the address field. The FVS338 login screen will display.
2. Enter admin for the User Name and password for the Password, both in lower case
letters.The firewall user name and password are not the same as any user name or password
you may use to log in to your Internet connection.
3. Click Login. The Broadband ISP Settings screen will display.
Configuring your Internet Connection
You can configure both Broadband ISP Settings and Dialup ISP Settings.from the WAN Settings
menu.
To configure your Broadband ISP Settings:
1. Select Network Configuration from the main menu and WAN Settings from the submenu.
The Broadband ISP Settings screen will display.
Figure 2-1
Note: You might want to enable remote management at this time so that you can log
in remotely in the future to manage the firewall. See “Enabling Remote
Management Access” on page 6-9 for more information. Remote management
enable is cleared with a factory default reset. If you enable remote
management, you are strongly advised to change your password (see
“Changing Passwords and Settings” on page 6-7).
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 177 178

Comments to this Manuals

No comments