Netgear PROSAFE FVS338 User Manual Page 121

  • Download
  • Add to my manuals
  • Print
  • Page
    / 178
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 120
FVS338 ProSafe VPN Firewall 50 Reference Manual
Virtual Private Networking 5-31
v1.0, September 2006
b. From the Select Certificate pull-down menu, select None.
c. From the ID Type pull-down menu, select Domain Name and create an identifier based on
the name of the IKE policy you created; for example “salesperson11.remote_id.com”.
d. Under Virtual Adapter pull-down menu, select Preferred. The Internal Network IP
Address should be 0.0.0.0.
e. Select your Internet Interface adapter from the Name pull-down menu.
3. On the left-side of the menu, select Security Policy.
a. Under Security Policy, Phase 1 Negotiation Mode, check the Aggressive Mode radio
button.
b. Check the Enable Perfect Forward Secrecy (PFS) radio button, and select the Diffie-
Hellman Group 2 from the PFS Key Group pull-down menu.
c. Enable Replay Detection should be checked.
4. Click on Authentication (Phase 1) on the left-side of the menu and select Proposal 1. Enter the
Authentication values to match those in the VPN firewall ModeConfig Record menu.
Note: If no box is displayed for Internal Network IP Address, go to Options/
Global Policy Settings, and check the box for “Allow to Specify Internal
Network Address.”
Figure 5-22
Page view 120
1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 177 178

Comments to this Manuals

No comments