Netgear PROSAFE FVS338 User Manual download pdf (Page 52)

FVS338 ProSafe VPN Firewall 50 Reference Manual

3-8 LAN Configuration

v1.0, September 2006

Setting Up Address Reservation

When you specify a reserved IP address for a device on the LAN (based on the MAC address of

the device), that computer or device will always receive the same IP address each time it accesses

the firewall’s DHCP server. Reserved IP addresses should be assigned to servers or access points

that require permanent IP settings. The Reserved IP address that you select must be outside of the

DHCP Server pool.

To reserve an IP address, use the Groups and Hosts screen under the Network Configuration

menu, LAN Groups submenu (see “Creating the Network Database” on page 3-5).

Configuring Static Routes

Static Routes provide additional routing information to your firewall. Under normal

circumstances, the firewall has adequate routing information after it has been configured for

Internet access, and you do not need to configure additional static routes. You must configure

static routes only for unusual cases such as multiple firewalls or multiple IP subnets located on

your network.

To add or edit a Static Route:

1. Select Network Configuration from the main menu and Routing from the submenu. The

Routing screen will display.

2. Click Add. The Add Static Route screen will display.

3. Enter a name for the static route in the Route Name field (for identification purpose only).

4. Determine whether the route is

• Active or Inactive. A route can be added to the table and made inactive, if not needed.

This allows routes to be used as needed without deleting the entry and re-adding it. An

inactive route is not broadcast if RIP is enabled. Select the Active radio box to make this

route effective.

• Private: Determine whether the route can be shared with other routers when RIP is

enabled. If Yes, then the route will not be shared in a RIP broadcast or multicast. Check

the Private radio box if you want to limit access to the LAN only. The static route will not

be advertised in RIP.

Note: The reserved address will not be assigned until the next time the PC contacts the

firewall's DHCP server. Reboot the PC or access its IP configuration and force a

DHCP release and renew.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 177 178

No comments

Netgear PROSAFE FVS338 User Manual Page 52