Netgear ProSafe FVS124G User Manual download pdf (Page 179)

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports

Network, Routing, Firewall, and Basics B-3

202-10085-01, March 2005

195.34.12.7

The latter version is easier to remember and easier to enter into your computer.

In addition, the 32 bits of the address are subdivided into two parts. The first part of the address

identifies the network, and the second part identifies the host node or station on the network. The

dividing point may vary depending on the address range and the application.

There are five standard classes of IP addresses. These address classes have different ways of

determining the network and host sections of the address, allowing for different numbers of hosts

on a network. Each address type begins with a unique bit pattern, which is used by the TCP/IP

software to identify the address class. After the address class has been determined, the software

can correctly identify the host section of the address. The follow figure shows the three main

address classes, including network and host sections of the address for each address type.

Figure 9-1: Three Main Address Classes

The five address classes are:

• Class A

Class A addresses can have up to 16,777,214 hosts on a single network. They use an eight-bit

network number and a 24-bit node number. Class A addresses are in this range:

1.x.x.x to 126.x.x.x.

• Class B

Class B addresses can have up to 65,354 hosts on a network. A Class B address uses a 16-bit

network number and a 16-bit node number. Class B addresses are in this range:

7261

lass A

etwork Node

lass B

lass C

Network Node

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 237 238

No comments

Netgear ProSafe FVS124G User Manual Page 179