Netgear N600 Wireless Dual Band Router WNDR3400v2 User Manual download pdf (Page 94)

Advanced Settings

N600 Wireless Dual Band Router WNDR3400v2

 To set up a static route:

1. Select Advanced > Advanced Setup > Static Routes, and click Add to display the

following screen:

2. In the Route Name field, type a name for this static route (for identification purposes only.)

3. Select the Priva

te check box if you want to limit access to the LAN only. If Private is

selected, the static route is not reported in RIP.

4. Select the Active check box to make this

route effective.

5. T

ype the IP address of the final destination.

6. T

ype the IP subnet mask for this destination. If the destination is a single host, type

255.255.255.255.

7. T

ype the gateway IP address, which has to be a router on the same LAN segment as the

N600 Wireless Dual Band Router.

8. T

ype a number between 1 and 15 as the metric value.

This value represents the number of routers between your network and the destination.

Usually

, a setting of 2 or 3 works, but if this is a direct connection, set it to 1.

9. Click Apply to

add the static route.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 119 120

No comments

Netgear N600 Wireless Dual Band Router WNDR3400v2 User Manual Page 94