Netgear N600 Wireless Dual Band Router WNDR3400v2 User Manual Page 29
- Page / 120
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
genie Basic Settings
29
N600 Wireless Dual Band Router WNDR3400v2
• Does your wireless device or computer show up on the Attached Devices screen? If it
does, then it is connected to the network.
• If you are not sure what the network name (SSID) or password is, look on the label on
the bottom of your router.
Wireless Setup Screen Fields
Region. The location where the router is used. Select from the countries in the list. In the
United States, the region is fixed to United States and is not changeable.
Wireless Network
Note: These settings apply separately to the 2.4 GHz b/g/n and 5 GHz a/n
bands.
Enable SSID Broadcast. This setting allows the router to broadcast its SSID so wireless
stations can see this wireless name (SSID) in their scanned network lists. This check box is
selected by default. To turn off the SSID broadcast, clear the Allow Broadcast of Name
(SSID) check box, and click Apply.
Enable Wireless Isolation. If this check box is selected, then wireless clients (computers or
wireless devices) that join the network can use the Internet, but cannot access each other or
access Ethernet devices on the network.
Name (SSID). The SSID is also known as the wireless network name. Enter a 32-character
(maximum) name in this field. This field is case-sensitive. The default SSID is randomly
generated, and NETGEAR strongly recommends that you do not change this.
Channel. This setting is the wireless channel used by the gateway. Enter a value from 1
through 13. For products in the North America market, only channels 1 through 11 can be
operated. Do not change the channel unless you experience interference (shown by lost
connections or slow data transfers). If this happens, experiment with different channels to
see which is the best.
Mode. Up to 130 Mbps is the default and allows 802.11n and 802.11g wireless devices to join
the network. g & b supports up to 54 Mbps. The 300 Mbps setting allows 802.11n devices to
connect at this speed.
Security Options Settings
Note: These settings apply separately to the 2.4 GHz b/g/n and 5 GHz a/n
bands.
- N600 Wireless Dual Band 1
- Router WNDR3400v2 1
- Trademarks 2
- Contents 3
- Chapter 5 USB Storage 4
- Chapter 6 Security 4
- Chapter 7 Administration 4
- Chapter 8 Advanced Settings 5
- Chapter 9 Troubleshooting 5
- Unpack Your Router 8
- Position Your Router 8
- Prepare the Router 9
- Hardware Setup 10
- Hardware Features 11
- Back Panel 13
- MAC addresses 14
- Serial number 14
- Preset WiFi Password 14
- Default access information 14
- Preset SSID 14
- Cable Your Router 15
- Verify the Cabling 15
- Connecting to the router 16
- Router Setup Preparation 17
- Types of Logins and Access 17
- NETGEAR genie Setup 18
- Upgrade Router Firmware 19
- Manual Method 21
- Internet Setup 23
- Attached Devices 25
- Parental Controls 26
- ReadySHARE USB Storage 26
- Basic Wireless Settings 27
- Wireless Network 29
- Security Options Settings 29
- Guest Networks 31
- Specifying custom settings 34
- Setup Wizard 35
- WPS Wizard 36
- Setup Menu 37
- WAN Setup 38
- Default DMZ Server 39
- Change the MTU Size 39
- Table 2. Common MTU sizes 40
- To change the MTU size: 40
- LAN Setup 41
- LAN TCP/IP Setup 42
- Use Router as a DHCP Server 42
- Address Reservation 42
- QoS for a Router LAN Port 46
- QoS for a MAC Address 47
- USB Storage 49
- USB Drive Requirements 50
- ReadySHARE Access 50
- Sharing Photos 51
- Basic Settings 52
- Add or Edit a Network Folder 53
- USB Storage Advanced Settings 54
- Available Network Folders 55
- Safely Remove a USB Drive 56
- Specify Approved USB Devices 56
- Security 59
- To block services: 61
- Schedule Blocking 62
- To schedule blocking: 63
- Administration 65
- Upgrade the Router Firmware 66
- View Router Status 67
- Statistics Button 68
- Connection Status Button 69
- Manage the Configuration File 72
- Backup Settings 73
- Set Password 74
- Advanced Settings 76
- Advanced Wireless Settings 77
- Wireless Repeating Function 79
- Set up the Base Station 80
- Set up a Repeater Unit 81
- Remote Computer Access Basics 82
- To set up port forwarding: 86
- Add a Custom Service 87
- Set up Port Triggering 89
- Dynamic DNS 91
- Static Routes 93
- To set up a static route: 94
- Remote Management 95
- USB Settings 96
- Universal Plug and Play 96
- Traffic Meter 98
- Scroll to 99
- Troubleshooting 100
- Quick Tips 101
- Troubleshooting with the LEDs 102
- Cannot Log in to the Router 103
- Cannot Access the Internet 104
- Troubleshooting PPPoE 105
- Changes Not Saved 106
- Incorrect Date or Time 107
- Wireless Connectivity 107
- Request timed out 108
- Supplemental Information 110
- Technical Specifications 112
- Notification of Compliance 114
- FCC Caution 115
- Industry Canada 115
- Caution: 115
- Avertissement: 116
- Interference Reduction Table 116
Related products and manuals for Routers Netgear N600 Wireless Dual Band Router WNDR3400v2
(44 pages)© 2020, manymanuals.com. All rights reserved. | 0.512 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals