Netgear DG834G User Manual download pdf (Page 51)

Reference Manual for the ADSL Modem Wireless Router DG834G

Wireless Configuration 4-7

v1.2, October 2006

How to Set Up and Test Basic Wireless Connectivity

Follow the instructions below to set up and test basic wireless connectivity. Once you have

established basic wireless connectivity, you can enable security settings appropriate to your needs.

1. Log in to the DG834G v3 firewall at its default LAN address of http://192.168.0.1 with its

default user name of admin and default password of password, or using whatever LAN

address and password you have set up.

2. Click the Wireless Settings link in the main menu of the DG834G v3 firewall.

3. Choose a suitable descriptive name for the wireless network name (SSID). In the SSID box,

enter a value of up to 32 alphanumeric characters. The default SSID is Wireless.

4. Set the Region. Select the region in which the wireless interface will operate.

WPA-PSK

(TKIP), WPA2-

PSK (AES)

WPA Pre-Shared-Key (Wi-Fi Protected Access Pre-Shared Key) uses a pre-shared key

to perform the authentication and generate the initial data encryption keys. Then, it

dynamically varies the encryption key. WPA-PSK (TKIP) implements most of the IEEE

802.11i standard and is designed to work with all wireless network interface cards, but

not all wireless access points. WPA2-PSK (AES) implements the full standard, but will

not work with some older network cards. For a full explanation of WPA, see “Wireless

Communications” in Appendix C.

WPA-802.1x,

WPA2-802.1x

User authentication is implemented using 802.1x and RADIUS servers. For a full

explanation of WPA, see “Wireless Communications” in Appendix C.

Fill in the following:

• Radius Server Name/IP Address

This field is required. Enter the name or IP address of the Radius Server on your LAN.

• Radius Port

Enter the port number used for connections to the Radius Server.

• Radius Shared Key

Enter the desired value for the Radius shared key. This key enables the DG834G v3

to log in to the Radius server and must match the value used on the Radius server.

Note: The SSID of any wireless access adapters must match the SSID you configure

in the 54 Mbps ADSL Modem Wireless Router Model DG834G. If they do not

match, you will not get a wireless connection to the DG834G v3.

Table 4-1. Wireless Security Options (continued)

Field Description

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 203 204

No comments

Netgear DG834G User Manual Page 51