Netgear DG834G User Manual download pdf (Page 68)

Reference Manual for the ADSL Modem Wireless Router DG834G

5-8 Protecting Your Network

v1.2, October 2006

• WAN Users—These settings determine which packets are covered by the rule, based on their

source (WAN) IP address. Select the desired option:

– Any — all IP addresses are covered by this rule.

– Address range — if this option is selected, you must enter the Start and Finish fields.

– Single address — enter the required address in the Start field.

• Log—You can select whether the traffic will be logged. The choices are:

– Never — no log entries will be made for this service.

– Always — any traffic for this service type will be logged.

– Match — traffic of this type which matches the parameters and action will be logged.

– Not match — traffic of this type which does not match the parameters and action will be

logged.

Inbound Rule Example: Allowing Videoconferencing

If you want to allow incoming videoconferencing to be initiated from a restricted range of outside

IP addresses, such as from a branch office, you can create an inbound rule. In the example shown

here, CU-SeeMe connections are allowed only from a specified range of external IP addresses. In

this case, we have also specified logging of any incoming CU-SeeMe requests that do not match

the allowed parameters.

Figure 5-6

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 203 204

No comments

Netgear DG834G User Manual Page 68