Netgear AC1600 User Manual download pdf (Page 199)

Manage the WAN and LAN Network Settings

199

AC1600 WiFi VDSL/ADSL Modem Router Model D6400

The previous figure shows only the top of the Internet Setup screen.

6. From the menu below DSL mode, select WAN2

7. Select the Enable This Interface check box.

By default, the Enable This Interface check box is selected for interface W

AN1 but

cleared for interface W

AN2.

8. Click the Apply button.

Your settings are saved.

Enable and Configure a VLAN

A network of computers and devices can behave as if they are connected to the same

network even though they might actually be physically on different segments of a LAN. Virtual

LANs (VLANs) are configured through software rather than hardware, which makes them

very flexible.

If you enable a VLAN and if the network devices (hubs and switches) on your LAN support

the VLAN (802.1Q) standard, the VLAN ID for the wireless access point is associated with all

traffic coming from the modem router.

If you are subscribed to IPTV service, the modem router might require VLAN tags to

distinguish between the Internet traffic and IPTV traf

fic.

Note: If your ISP provides directions on how to set up VLANs for IPTV and

Internet service, follow those directions.

 To enable and configure a VLAN for interface WAN1 and another VLAN for interface

WAN2:

1. Launch an Internet browser from a computer or WiFi device that is connected to the

network.

2. Type http://www

.routerlogin.net.

A login screen displays.

3. Enter the user name and password for the modem router.

The user name is admin.

The default password is

password. The user name and

password are case-sensitive.

4. Click the OK button.

The BASIC Home screen displays.

5. Select Internet.

1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 291 292

No comments

Netgear AC1600 User Manual Page 199