Get Started
Rev 1 Oct.13 11
Status LED
The LED indicates the device’s connection status:
You can set the device to not light the LED during regular use (Data connection ready,
Data connection not ready, Data transferring).
To set the status LED behaviour:
1. On the home screen, tap Settings > Display.
2. Tap LED, then select:
· Off — The status LED will not only light up when the device is booting up or a
software update is being downloaded for installation.)
· On — The status LED follows the behaviour described in Table 1-2.
LCD touchscreen
The hotspot’s touchscreen LCD displays:
• Wi-Fi name and password
• Network signal icons (See Table 1-3 on page 12 for details.)
• Data usage details
• Wi-Fi details (Wi-Fi network management — Main / Guest Wi-Fi and Dual-Band
Wi-Fi, Wi-Fi range, connected devices, etc.)
• Device settings (screen brightness, software updates, view wireless number, etc.)
• System alerts
• Device tutorial
Use the touchscreen to:
• Personalize the hotspot and change basic settings — Use the homescreen Settings
and Wi-Fi options.
• Charge another device’s battery — Use the Jump Boost feature.
For advanced settings, use a Wi-Fi enabled device to connect to the hotspot and then
visit the homepage at http://m.home.
Table 1-2: LED indicator patterns
Colour LED pattern What the pattern means
Blue
a
a. LED pattern displays only if the LED feature is enabled. See below.
Single blink
(every 3 seconds)
Data connection is ready for use
Amber
a
Blink (every 3 seconds) Data connection is not ready (disconnected or no
signal)
Blue
a
Double blink
(every 3 seconds)
Data is transferring (uploading / downloading) on the
data connection
Blue /
Amber
Slow blink, alternating blue
and amber
New software is being downloaded for installation
Amber Solid Software is installing on the device
Comments to this Manuals