Netgear ADSL2+ Modem Router DM111PSPv2 User Manual Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
ADSL2+ Modem Router DM111PSPv2 User Manual
1-4 Configuring Your Internet Connection
v1.0, December 2008
Figure 1-2 on page 1-3 shows whether or not the modem router is connected to the Internet,
and the basic Internet connection settings.
Setting Up Your Modem Router Manually
If you elect not to use the Smart Wizard, you can set up the modem router manually. However, you
need to prepare the following before you can set up your modem:
Active Internet service provided by an Asymmetric Digital Subscriber Line (ADSL) account.
The Internet Service Provider (ISP) configuration information for your ADSL account.
ISP login name and password
ISP Domain Name Server (DNS) addresses
Fixed or static IP address
Host and domain names
Depending on how your ISP set up your Internet account, you need to know one or more of
these settings:
Virtual path identifier (VPI) and Virtual channel identifier (VCI) parameters
Multiplexing method
Host and domain names
ASDL microfilters as explained in the ADSL2+ Modem Router Setup Manual.
Your computer must be set up to use DHCP to get its TCP/IP configuration from a router. This
is usually the case. For help with DHCP, see the documentation that came with your computer,
or see the link to the online document in
“Preparing Your Network” in Appendix B.
Your ISP should have provided you with all the information needed to connect to the Internet. If
you cannot locate this information, you can ask your ISP to provide it.
You can use the Setup Wizard to auto-detect your Internet connection, or you can bypass the
wizard and enter settings in the Quick Setup screens.
Setup Wizard. This wizard searches your Internet connection for servers and protocols to
determine your Internet Service Provider (ISP) configuration. See the following section,
“Using the Setup Wizard to Auto-Detect the Internet Connection.”
Note: The Setup Wizard cannot detect a PPTP connection with your ISP. If your ISP
uses this protocol, then you must use Quick Setup to configure your connection
manually.
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 87 88

Comments to this Manuals

No comments