with 4-port 10/100 Mbps switch DG814DSL Modem Internet GatewayInstallation Guide
Configure the Gateway and Test theConnectionNow you configure the gateway to work with your ISP. You’ll need the information you filledin on page 4. Y
Connect and Configure Other Computers(optional)Now that you have one computer set up to access the Internet through the gateway, you canconnect other
Optional ConfigurationsContent FilteringAfter you have successfully set up the gateway for Internet access, you can configure it to filterout inapprop
TroubleshootingNo lights are lit on the gatewayThe gateway has no power.• Make sure the power adapter is properly connected to the gateway.• Make sure
For Windows, the Network Properties should have Obtain an IP address automaticallyselected (see page 6). For Macintosh computers, the TCP/IP (or Netwo
Glossary of TermsYou’ll find a more extensive glossary in the Reference Manual on the DG814 Resource CD.Category 5 (CAT5): A twisted pair cable that m
Voluntary Control Council for Interference (VCCI) StatementThis equipment is in the second category (information equipment to be used in residential a
Technical SupportYOU MUST REGISTER TO OBTAIN TECHNICAL SUPPORT. PLEASE RETAINPROOF OF PURCHASE AND THE WARRANTY INFORMATION. To register your product,
IntroductionThank you for purchasing a NETGEAR DG814 DSL Modem Internet Gateway. With thisgateway you can have secure Internet access through its high
What’s in the BoxWhen you open the box, verify that you received everything. The package includes:• DG814 DSL Modem Internet Gateway• AC power adapter
Gather Configuration Information fromYour Internet Service ProviderBefore installing the DG814 gateway, you should have active DSL service and an Inte
Host and Domain NamesSome ISPs use a specific host or domain name—like CCA7324-A or home. If you haven’tbeen given specific information about host or
Install the GatewayAfter unpacking the box and locating the configurationinformation, you can install the gateway.Note: You do not have to power down
Configure the Computer to Work withthe Gateway and Restart the NetworkNext, you configure the computer to interact with the gateway. To do this, you c
Macintosh Operating SystemMac OS® 8.6 or 9.x1. Choose Control Panels >TCP/IPfrom the Apple () menu.2. If not already selected, select Ethernetin t
Comments to this Manuals