Netgear WNHD3004 User's Guide Page 43

  • Download
  • Add to my manuals
  • Print
  • Page
    / 64
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 42
3DHD Home Theater Adapter WNHD3004 User Manual
Using Network Management Tools 6-3
v1.0, November 2010
Table 6-1 describes the Device Info status fields.
Table 6-1. Device Info Status Fields
Field Description
General
Time The current time.
System up time How long the unit has been running since its last restart.
Firmware Version The version of the firmware running in the unit.
LAN
Connection Type If set to None, the unit has a fixed IP address. If set to DHCP Client,
the unit obtains an IP address dynamically from a DHCP server.
MAC Address The Media Access Control address. This is the unique physical
address being used by the Ethernet ports of the unit.
IP Address The IP address being used by the Ethernet port of the unit.
IP Subnet Mask The IP subnet mask. For an explanation of subnet masks and subnet
addressing, click the link to the online document “TCP/IP Networking
Basics” in Appendix B.
Default Gateway The IP address of the router in your network.
Primary DNS Server The Primary Domain Name Server addresses being used by the
router. A Domain Name Server translates human-language URLs
such as www.netgear.com into IP addresses.
DHCP Server The Secondary Domain Name Server addresses being used by the
router.
Wireless LAN
Wireless Radio The WNHD3004 wireless signal should be enabled all the time.
MAC Address This is the unique physical address being used by the Ethernet ports
of the wireless interface.
Network Name (SSID) The wireless network name (SSID) being used by the wireless port of
the Bridge/AP. The default is WNHD3400.
Channel Identifies the channel of the wireless port being used. Click the link to
the online document “Wireless Networking Basics” in Appendix B for
the frequencies used on each channel.
Security Mode Indicates the wireless security mode:
•None
WPA/WPA2-PSK - Mixed (the default)
Wi-Fi Protected Setup Indicates whether WPS is enabled.
Page view 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 63 64

Comments to this Manuals

No comments