Netgear WNHD3004 User's Guide download pdf (Page 12)

3DHD Home Theater Adapter WNHD3004 User Manual

1-4 Getting Started

v1.0, November 2010

Positioning Your Unit

The operating distance or range of your wireless connection can vary significantly depending on

the physical placement of your unit. For example, the thickness and number of walls the wireless

signal must pass through might limit the range.

For best results, place your WNHD3400:

• Near the center of the area where your computers and other devices will operate, preferably

within line of sight to your wireless devices.

• Accessible to an AC power outlet and near Ethernet cables for other devices.

• In an elevated location such as a high shelf, keeping the number of walls and ceilings between

the wireless access point and your other devices to a minimum.

• Away from any large metal surfaces, such as a solid metal door or aluminum studs. Large

expanses of other materials such as glass, insulated walls, fish tanks, mirrors, brick, and

concrete can also affect your wireless signal.

• If placing two WNHD3004 devices with a direct line of sight between them, do not place them

closer than 10 feet, as the antennas are tuned for this optimum distance.

For information about connecting the WNHD3004 to a router or connecting a wireless device to

the WNHD3004 Access Point, see

“Access Point Mode WPS Setup” on page 2-2.

Note: Failure to follow these guidelines can result in significant performance degradation

or an inability to wirelessly connect to the home theater adapter.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 63 64

No comments

Netgear WNHD3004 User's Guide Page 12