Netgear WNHD3004 User's Guide download pdf (Page 19)

3DHD Home Theater Adapter WNHD3004 User Manual

Setting Up Your Wireless Network 2-7

v1.0, November 2010

Connecting Other Devices to a WNHD3004

There are four ways you can connect other devices to the access point:

• For wireless devices that support the WPS automated method, repeat the steps in the “WPS

Push Button Client Setup” on page 2-3 for the WPS setup method. WPS will automatically

transfer the security settings from the Wireless-N Access Point to the device you are adding.

• For wireless devices that do not support WPS, manually configure them. Refer to the

instructions in the product documentation of the wireless device you will add. The default

wireless network name (SSID) is WNHD3400.

• For wired devices, use an Ethernet cable to connect to an available Ethernet port on the

WNHD3004.

• Use the Setup Wizard.

The Setup Wizard lets you use two wizards, one that guides you through connecting a wireless

device to your Access Point, and another to help you with your wireless network setup.

For the Bridge/Station, this screen has only one function: to set up its wireless settings to

match it on the AP side, either through WPS, or through manual settings.

Figure 2-6

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 63 64

No comments

Netgear WNHD3004 User's Guide Page 19