Netgear WNHD3004 User's Guide Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 64
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
3DHD Home Theater Adapter WNHD3004 User Manual
Wireless Security 4-7
v1.0, November 2010
The available settings in this screen are:
Enable SSID Broadcast. If this check box is selected, the wireless access point will
broadcast its name (SSID) to all wireless stations. Stations will be able to see this SSID for
connections to this Access Point.
Enable WMM. WMM (Wi-Fi Multimedia) is a component of the IEEE 802.11e wireless
LAN standard for quality of service (QoS). It specifically supports priority tagging and
queuing.
WPS Settings. For information about these settings, see the following section, “Using
Push 'N' Connect (Wi-Fi Protected Setup)” on page 4-7.
Wireless Station Access List. For information about this list, see “Restricting Wireless
Access by MAC Address” on page 4-10.
Using Push 'N' Connect (Wi-Fi Protected Setup)
If your wireless clients support Wi-Fi Protected Setup (WPS), you can use this feature to connect a
wireless client securely and easily to the Access Point. Look for the symbol on your client
device. WPS automatically configures the wireless client with the same network name (SSID) and
wireless security settings on the access point.
When you add wireless clients, whether or not they are WPS enabled, the added devices must
share the same network name (SSID) and security passphrase. For more information, see
“Connecting Additional Wireless Client Devices after WPS Setup” on page 4-10.
The home theater adapter provides two methods for connecting to a wireless client that supports
WPS, described in the following sections:
Push Button Configuration
Enabling a Wireless Client
Note: NETGEAR’s Push 'N' Connect feature is based on the Wi-Fi Protected Setup
(WPS) standard (for more information, see http://www.wi-fi.org). All other Wi-Fi-
certified and WPS-capable products should be compatible with NETGEAR
products that implement Push 'N' Connect.
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 63 64

Comments to this Manuals

No comments