Netgear PROSAFE WG302v2 User Manual download pdf (Page 89)

NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual

Command Line Reference C-7

v1.0, May 2006

helpful for viewing basic system information.

Configuring Basic Settings

The commands in Table C-6 correspond to the Basic Settings page on the Web UI.

Table C-5 System Information

Task Command

View hardware information

get system

View information about all interfaces

get interface

View information about the 802.11 radio

get radio

View information about the Security Profiles

get vap

View DNS settings

get host

Table C-6 Basic Setting s

Task Command

Set the Access Point Name

set host id <name>

Example:

set host id LAB_AP

Set the Country / Region

set system country <2_letter_country_code>

Example:

set system country us

Enable the DHCP Client

set management dhcp-client status up

Disable the DHCP Client

set management dhcp-client status down

Set a Static IP Address

set interface brvlan1 static-ip <ip_address>

Example:

set interface brvlan1 static-ip 10.10.12.221

Set a Subnet Mask

set interface brvlan1 static-mask <netmask>

Example:

set interface brvlan1 static-mask

255.255.255.0

Set the Default Gateway

set static-ip-route gateway <ip_address>

Example:

set static-ip-route gateway 10.10.12.1

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 101 102

Comments to this Manuals

No comments

Netgear PROSAFE WG302v2 User Manual Page 89

Comments to this Manuals

Related products and manuals for WLAN access points Netgear PROSAFE WG302v2