Netgear PROSAFE WG302v2 User Manual Page 46

  • Download
  • Add to my manuals
  • Print
  • Page
    / 102
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 45
NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual
3-2 Management and Information
v1.0, May 2006
Remote Management
To access the Remote Management screen:
1. Enter the LAN address of the WG302v2 into the address field of your browser.
2. After you log in, click Remote Management under Management on the main menu
.
3. Enter the Remote Management information.
Secure Shell (SSH): If set to Enable, the Wireless Access Point will only allow remote
access via Secure Shell and Secure Telnet. The default is Enable.
SNMP: Enable SNMP to allow the SNMP network management software, such as HP
OpenView, to manage the wireless access point via SNMPv1/v2 protocol.
Public Community Name: The community string to allow the SNMP manager to read the
wireless access point's MIB objects. The default is public.
Private Community Name: The community string to allow the SNMP manager to read
and write the wireless access point's MIB objects. The default is private.
Community Name for Traps: The community string associated with the IP address to
Receive Traps. There is no default value.
IP address to Receive Traps: The IP address of the SNMP manager to receive traps sent
from the wireless access point. The default is 0.0.0.0.
4. Click Apply to save your settings.
Figure 3-2
Page view 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 101 102

Comments to this Manuals

No comments