Netgear MVBR1210C User's Guide download pdf (Page 94)

Advanced

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C

 To configure static routes:

1. From the main menu, under Advanced, select Static Routes to view the Static Routes

screen.

2. Select the radio button of the static route you want to configure.

3. Click Add or Edit

to display the following screen:

4. Fill in or change the fields:

• Route Name. The

route name is for identification purposes only.

• Private. Select this check box if you want to limit access to the LAN only

The static route will not be reported in RIP.

• Active. Select this check box to make this route

effective.

• Destination IP Address a

nd IP Subnet Mask. Type the destination IP address of the

final destination. If the destination is a single host, type a subnet value of

255.255.255.255.

• Gateway IP Address. This needs to

be a router on the same LAN segment as the

router.

• Metric. Ty

pe a number between 2 and 15. This represents the number of routers

between your network and the destination. Usually, a setting of 2 or 3 works, but if this

is a direct connection, set it to 2.

5. Click Apply to save

your changes. If you added a static route, it is added to the Static

Routes screen.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 115 116

No comments

Netgear MVBR1210C User's Guide Page 94