Netgear MVBR1210C User's Guide download pdf (Page 85)

Advanced

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C

LAN Setup

The LAN Setup screen allows configuration of LAN IP services such as DHCP and RIP.

These features can be found under Advanced in the router main menu.

The router is shipped preconfigured to use private IP addresses on the LAN side, and to act

as a DHCP server

. The router default LAN IP configuration is:

•

LAN IP addre

s. 192.168.0.1

• Subnet mask. 255.255.255.0

hese addresses are part of the Internet Engineering Task Force (IETF)–designated private

address range

for use in private networks, and should be suitable in most applications. If your

network has a requirement to use a different IP addressing scheme, you can make those

changes in this screen.

Tip: If you change the LAN IP address of the router while connected through

he browser, you will be disconnected, and so will others connected to

the router. To connect to the router, you need to open a new connection

to the new IP address and log in again. Others using the router need to

restart their computers to connect to the router again.

 To view or change the LAN setup:

1. Select LAN I

P to display the LAN Setup screen.

2. Change the settings. For more information, see DHCP Settings on page 86 or Reserved IP

Addresses on p

age 87.

3. Click Apply to save

the changes.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 115 116

No comments

Netgear MVBR1210C User's Guide Page 85