Netgear MVBR1210C User's Guide download pdf (Page 18)

Connecting to the Internet

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C

Internet Service Provider Select your Internet service provider from the drop-down list.

Access Number The remote site’s phone number.

PIN code Pin code of the SIM card, where applicable.

APN Access point name.

PDP type Select the type of packet data protocol:

• IP

• PDP-IP

• PPP

• PPP-IP

Connect automatically at startup When this check box is selected, the modem automatica

lly connects

to the network when powered up. This should be selected after login

information is provided.

Roaming automatically When this check box is selected, the unit might roam to any available

perator in range and might incur roaming charges.

Use internal antenna If this check box is selected, the router

will use the internal antenna

rather than the external antenna.

Wireless Button Configuration Select the option to determine what happens when the WPS button

n the front panel is pressed.

• Co

ntrol Wi-Fi Only. Pressing the button toggles the WiFi function.

If WiFi is turned on, pressing the button turns off the WiFi. Pressing

it again turns on the WiFi. This function is available only if the WiFi

function is enabled. The wireless broadband function is unaffected.

• Con

trol Both Wi-Fi and Wireless Broadband. Pressing the push

button toggles both the WiFi function and wireless broadband at

the same time. If WiFi is turned on, pressing the button turns off the

WiFi. At the same time, the wireless broadband connection is

disconnected. If you press the button again, WiFi is turned on and

the router attempts to reestablish the wireless broadband

connection. Depending on the coverage, wireless broadband

coverage might or might not be connected successfully.

Connection status Current WAN port status.

Table 3. Settings

Fields and check boxes Description

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 115 116

No comments

Netgear MVBR1210C User's Guide Page 18