Netgear MVBR1210C User's Guide download pdf (Page 77)

Advanced

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C

Advanced Wireless Settings

From the main menu, select Advanced Wireless Settings to display the following screen:

Field Description

Enable Wireless Router Radio Selected by default, this setting enables the wireless radio, which

allows the router to work as a wireless access point.

Turning off the wireless radio can be helpful for configuration,

netw

ork tuning, or troubleshooting.

Enable SSID Broadcast The router broadcasts its wireless network na

me (SSID).

Fragmentation Length, CTS/RTS

Threshold, and Preamble Mode

These should be left at their default settings.

Router’s PIN The PIN number used for Push 'N' Connect.

Disable Router’s PIN By default, this check box is cleared. This

allows the WPS clients to

discover the router’s PIN.

Keep Existing Wireless Settings By default, this check box is cleared. This

allows the router to

automatically generate the SSID and WPA/WPA2 security settings

when it implements WPS. After WPS is implemented, the router

automatically selects the Keep Existing Wireless Settings check box

so that your SSID and wireless security settings remain the same if

other WPS-enabled devices are added later.

Set Up Access List Access control is disabled by defau

so that any computer

configured with the correct SSID can connect. See Restrict Access

by MAC Address on pag

e 78.

Wireless Station Access Control

By default, any wireless computer configured with the correct SSID and wireless security

settings is allowed access to your wireless network. You can use wireless access point

settings in the Wireless Settings screen to further restrict wireless access to your network:

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 115 116

No comments

Netgear MVBR1210C User's Guide Page 77