Netgear MVBR1210C User's Guide Page 78

  • Download
  • Add to my manuals
  • Print
  • Page
    / 116
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 77
Advanced
78
Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C
Turn off wireless connectivity completely.
You can completely turn off the wireless portion
of the router. For example, if you use your
notebook computer to wirelessly connect to your router, and you take a business trip, you
can turn off the wireless portion of the router while you are traveling. Other members of
your household who use computers connected to the router through Ethernet cables can
still use the router. To do this, clear the Enable Wireless Router Radio check box on the
Advanced Wireless Settings screen, and then click Apply.
Hide
your wireless network name (SSID).
By default, the router is set to broadcast its wireless network name (SSID). You can
rest
rict wireless access to your network by not broadcasting the wireless network name
(SSID). To do this, clear the Enable SSID Broadcast check box on the Advanced
Wireless Settings screen, and then click Apply. Wireless devices will not “see” your
router. You need to configure your wireless devices to match the wireless network name
(SSID) of the router.
Note: The SSID of any wireless access adapters needs to match the SSID
you configure in the router. If they do not match, you will not get a
wireless connection to the router.
Restrict Access by MAC Address
For increased security, you can restrict access to the wireless network to allow only specific
computers based on their MAC addresses. You can restrict access to only trusted computers
so that unknown computers cannot wirelessly connect to the Mobile Voice HSPA+
Broadband 11n Wireless Router. MAC address filtering adds an obstacle against unwanted
access to your network, but the data broadcast over the wireless link is fully exposed.
Note: If you configure the router from a wireless computer, add your
computers MAC address to the access list. Otherwise you will lose
your wireless connection when you click Apply. You need to then
access the router from a wired computer, or from a wireless
computer that is on the access control list, to make any further
changes.
Page view 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 115 116

Comments to this Manuals

No comments