Netgear WNDR3300f User Manual download pdf (Page 31)

Troubleshooting 27

Troubleshooting

This chapter gives information about troubleshooting your wireless router. You can find help with

the following problems:

• “Basic Setup Checklist” on page 27

• “Checking Your Basic Router Functions” on page 28

• “Troubleshooting Login Problems” on page 30

• “Checking The Internet Service Connection” on page 31

• “Testing the Path from a PC to Your Router” on page 33

• “Testing the Path from a PC to the Internet” on page 34

Basic Setup Checklist

The following items are the most common errors made when initially setting up a router. Carefully

review the checklist to make sure that you have followed the recommended procedures.

Be sure to always start your network in this sequence:

Turn off and unplug the modem from its power outlet, and turn off the wireless router and

computer.

2. Turn on the modem, and wait 2 minutes.

3. Turn on the wireless router, and wait 1 minute.

4. Turn on the computer.

Make sure that the Ethernet cables are securely plugged in:

Verify that the Internet status light on the wireless router is lit if the Ethernet cable to the

wireless router from the modem is plugged in securely and the modem and wireless router are

both turned on (see “Front Panel” on page 3).

2. Verify that for each powered-on computer connected to the wireless router with a securely

plugged in Ethernet cable, the corresponding wireless router LAN port status light is lit (see

“Front Panel” on page 3). The label on the bottom of the wireless router identifies the number

of each LAN port (see “Router Label” on page 6).

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

No comments

Netgear WNDR3300f User Manual Page 31