Netgear WG602v2 User's Guide download pdf (Page 24)

Basic Installation and Configuration 3-1

M-10181-03

Chapter 3

Basic Installation and Configuration

This chapter describes how to set up your 54 Mbps Wireless Access Point WG602 v2 for wireless

connectivity to your LAN. This basic configuration will enable computers with 802.11b or

802.11g wireless adapters to do such things as connect to the Internet, or access printers and files

on your LAN.

You need to prepare these three things before you can establish a connection through your wireless

access point:

• A location for the WG602 v2 that conforms to the guidelines below.

• A device such as a hub, switch, router, or Cable/DSL gateway.

• One or more computers with properly configured 802.11b or 802.11g wireless adapters.

Observing Placement and Range Guidelines

The operating distance or range of your wireless connection can vary significantly based on the

physical placement of the wireless access point. The latency, data throughput performance, and

notebook power consumption of wireless adapters also vary depending on your configuration

choices.

Note: Indoors, computers can connect over wireless networks at ranges of several

hundred feet or more. This distance can allow for others outside your area to access your

network. It is important to take appropriate steps to secure your network from

unauthorized access. The WG602 v2 Access Point provides highly effective security

features which are covered in detail in this chapter. Deploy the security features

appropriate to your needs.

Note: Failure to follow these guidelines can result in significant performance

degradation or inability to wirelessly connect to the WG602 v2.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 121 122

No comments

Netgear WG602v2 User's Guide Page 24