Netgear WG602 User Manual download pdf (Page 41)

User’s Guide for the WG602 v3 54 Mbps Wireless Access Point

Basic Installation and Configuration 3-18

202-10060-01, September 2004

• Disable

• Allow

•Block

3. Then, enter the MAC address for a device you plan to use. You can usually find the MAC

address printed on the wireless adapter.

You can copy and paste the MAC addresses from the WG602 v3’s Station List page into the

MAC Address box. To do this, configure each wireless PC to obtain a wireless link to the

WG602 v3. The PC should then appear in the Station List page.

4. Click Add to add the wireless device to the access list. Repeat these steps for each additional

device you want to add to the list.

5. Be sure to click Apply to save your wireless access control list settings.

Now, only devices on this list will be allowed to wirelessly connect to the WG602 v3. For blocking

access from specific devices, follow the procedure above, except select the Block radio button.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 119 120

No comments

Netgear WG602 User Manual Page 41