Netgear WG602 User Manual download pdf (Page 38)

User’s Guide for the WG602 v3 54 Mbps Wireless Access Point

3-15 Basic Installation and Configuration

202-10060-01, September 2004

How to Configure WEP Wireless Security

To configure WEP data encryption, follow these steps:

1. Click the Security Settings link in the Setup section of the main menu and select WEP for the

Security Type.

Figure 3-10: WEP Settings page

The Authentication Type is set to Any by default. Change the Authentication Type to Shared

Key to use WEP data encryption.

3. For the Encryption Strength, select 64- or 128-bit encryption.

4. You can manually or automatically program the four data encryption keys. These values must

be identical on all PCs and access points in your network.

Note: If you use a wireless PC to configure WEP settings, you will be disconnected

when you click Apply. Reconfigure your wireless adapter to match the new settings or

access the wireless access point from a wired PC to make any further changes.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 119 120

No comments

Netgear WG602 User Manual Page 38