Netgear WG602 User Manual download pdf (Page 45)

User’s Guide for the WG602 v3 54 Mbps Wireless Access Point

Management 4-3

202-10060-01, September 2004

Viewing a List of Attached Devices

The Station List page contains a table of all IP devices associated with the wireless access point in

the wireless network defined by the Wireless Network Name (SSID). From the main menu of the

browser interface, under the Management heading, click the Station List link to view the list,

shown below.

Figure 4-2: Information Station List of associated devices

For each device, the table shows the MAC address and whether the device is allowed to

communicate with the wireless access point or not. Note that if the wireless access point is

rebooted, the table data is lost until the wireless access point rediscovers the devices. To force the

wireless access point to look for associated devices, click the Refresh button.

Note: A wireless network can include multiple wireless access points, all using the same network

name (SSID). This enables extending the reach of the wireless network and allows users to roam

from one access point to another, providing seamless network connectivity. Under these

circumstances, be aware that only the stations associated with this access point will be presented in

the Station List.

Upgrading the Wireless Access Point Software

Note: When uploading software to the WG602 v3 Access Point, it is important not to

interrupt the Web browser by closing the window, clicking a link, or loading a new page.

If the browser is interrupted, the upload may fail, corrupt the software, and render the

WG602 v3 completely inoperable.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 119 120

No comments

Netgear WG602 User Manual Page 45