Netgear WG102 User Manual Page 77

  • Download
  • Add to my manuals
  • Print
  • Page
    / 118
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 76
Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
Advanced Configuration 5-11
202-10064-02, June 2005
If using DHCP, all WG102 Access Points should be set to “Obtain an IP address
automatically (DHCP Client)” in the IP Address Source portion of the Basic IP Settings
menu.
All WG102 Access Points use the same SSID, Channel, authentication mode, if any, and
encryption in use.
All Point-to-Point APs must have AP2’s MAC address in its Remote AP MAC address
field.
3. Verify connectivity across the LANs.
A computer on any LAN segment should be able to connect to the Internet or share files
and printers with any other PCs or servers connected to any of the three LAN segments.
Wireless stations will not be able to connect to the WG102 Access Points in the
illustration above. If you require wireless stations to access any lan segment, you can
additional WG102 Access Points configured in Wireless Access Point mode to any LAN
segment.
Note: You can extend this multi-point bridging by adding additional WG102s configured in
Point-to-Point mode for each additional LAN segment. Furthermore, you can extend the range of
the wireless network with NETGEAR wireless antenna accessories.
How to Configure Wireless Repeating
Figure 5-7: Repeater bridging
Page view 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 117 118

Comments to this Manuals

No comments