Netgear WG102 User Manual download pdf (Page 52)

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102

3-30 Basic Installation and Configuration

202-10064-02, June 2005

To configure WPA and WPA2, follow these steps:

1. Log in at the default LAN address of http://192.168.0.229 with the default user name of

admin and default password of password, or using whatever LAN address and password you

have set up.

2. Click Radius Server Settings in the Security menu.

Figure 3-18: Radius Server Settings menu

Enter the Radius settings.

• Authentication/Access Control Radius Server Configuration: This configuration is

required for authentication using Radius. IP Address, Port No. and Shared Secret is

required for communication with Radius Server. A Secondary Radius Server can be

configured which is used on failure on Primary Radius Server

• IP Address: The IP address of the Radius Server. The default is 0.0.0.0.

• Port Number: Port number of the Radius Server. The default is 1812.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 117 118

No comments

Netgear WG102 User Manual Page 52