Netgear WG102 User Manual download pdf (Page 25)

NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual

Basic Installation and Configuration 1-9

v1.0, July 2008

Using a computer with an 802.11b or 802.11g wireless adapter with the correct wireless

settings needed to connect to the WG102 Access Point (SSID, WEP/WPA, MAC ACL, etc.),

verify connectivity by using a browser such as Netscape or Internet Explorer to browse the

Internet, or check for file and printer access on your network.

Logging in to the Wireless Access Point

The default IP address of your access point is 192.168.0.229. The WG102 Access Point is set, by

default, for the DHCP client to be disabled.

1. Open a Web browser such as Internet Explorer or Netscape Navigator.

2. Connect to the WG102 Access Point by entering its default address of http://192.168.0.229

into your browser.

Note: If you are unable to connect, see Chapter 5, “Troubleshooting

Note: The computer that you use to connect to the WG102 Access Point should be

configured with an IP address that starts with 192.168.0.x and a Subnet Mask of

255.255.255.0.

Figure 1-6

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 69 70

No comments

Netgear WG102 User Manual Page 25