Netgear WG102 User Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 70
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual
Basic Installation and Configuration 1-3
v1.0, July 2008
Rear Panel
Viewed from left to right, the back of the WG102 provides the following:
1. Detachable antenna.
2. Ground.
3. Reset button. This restores the default factory settings.
4. RJ-45 Ethernet LAN/POE Port. Use the WG102 Ethernet RJ-45 port to connect to an Ethernet
LAN through a device such as a hub, switch, router, or Power Over Ethernet (POE) switch.
5. Power socket. This connects to the WG102 power adapter.
Cabling Requirements
The WG102 Access Point connects to your LAN via twisted-pair Category 5 Ethernet cable with
RJ-45 connectors.
LAN Ethernet link indicator
Off No connection detected on the Ethernet link
Amber On 10 Mbps Ethernet link detected
Amber Flashing Data is being transmitted or received on the 10 Mbps Ethernet link
Green On 100 Mbps Fast Ethernet link detected.
Green Flashing Data is being transmitted or received on the 100 Mbps Ethernet link
WLAN Wireless LAN Link Activity Indicator
Off No wireless link activity.
Green Blink Wireless link activity.
Figure 1-2
LED Description
1
234
5
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 69 70

Comments to this Manuals

No comments