Netgear WG102 User Manual download pdf (Page 45)

NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual

Management 3-3

v1.0, July 2008

Activity Log

From the WG102 Access Point main menu, under the Information heading, select Activity Log.

You can use a SysLog server to view the Activity Log. If you have a SysLog server on your LAN,

then enable the SysLog. If enabled, you must enter the IP address of your SysLog server and the

port number that your SysLog server uses.

• SysLog Server IP address: The access point sends all the SysLog to the specified IP address if

SysLog option is enabled. Default: 0.0.0.0

• Port: The port number configured in the SysLog server on your LAN. The default is 514

The Activity Log screen displays the Access Point system activity.

You can click Refresh to update the display. To save the log contents into a file on your PC, click

Save As and save the file to a disk drive.

Figure 3-7

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 69 70

No comments

Netgear WG102 User Manual Page 45