Netgear WG102 User Manual download pdf (Page 18)

NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual

1-2 Basic Installation and Configuration

v1.0, July 2008

• Support Registration card.

Contact your reseller or customer support in your area if there are any missing or damaged parts.

See the Support Information Card for the telephone number of customer support in your area. You

should keep the Support Information card, along with the original packing materials, and use the

packing materials to repack the WG102 if you need to return it for repair. To qualify for product

updates and product warranty registrations, we encourage you to register on the NETGEAR Web

site at:

http://www.NETGEAR.com.

Hardware Description

The NETGEAR WG102 ProSafe 802.11g Wireless Access Point front and rear hardware functions

are described below.

Front Panel

Viewed from left to right, the WG102 has these four status LEDs: PWR, TEST, LAN, and WLAN.

Figure 1-1

LED Description

PWR Power Indicator

Off No power. If this LED does not come on with the power adapter and

cord correctly installed, see Chapter 5, “Troubleshooting.

On Power is on.

TEST Self Test Indicator

Blink Indicates self test, loading software, or system fault (if continues).

Note: This LED may blink for a minute before going off.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 69 70

No comments

Netgear WG102 User Manual Page 18