Netgear WG102 User Manual Page 33

  • Download
  • Add to my manuals
  • Print
  • Page
    / 134
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 32
| 33
3
3.
Wireless Configuration and Security
This chapter describes how to configure the wireless features of your wireless access point.
In planning your wireless network, consider the level of security required.
WARNING!
If you are configuring the wireless access point from a wireless
PC and you change the wireless access point’s SSID, channel, or
wireless security settings, you will lose your wireless connection
when you click Apply. You must then change the wireless settings
of your PC to match the wireless access point’s new settings.
Before you set up wireless security and additional wireless features that are described in this
chapter, connect the wireless access point, get the Internet connection working, configure
802.11b/g wireless settings, and configure basic wireless network settings, as described in
Chapter 2. The wireless access point should work with an Ethernet LAN connection and
wireless connectivity should have been verified before you set up wireless security and
additional wireless features.
This chapter includes:
Wireless Data Security Options on this page
“Security Profiles” on page 35
“Configuring RADIUS Server Settings” on page 45
“WAPI Certificates” on page 49
“Configuring Alternate DHCP Server Settings” on page 52
“Configuring Wireless Quality of Service” on page 54
“Configuring Wireless Client Separation” on page 58
Wireless Data Security Options
Indoors, computers can connect over 802.11n wireless networks at a maximum range of 300
feet. Typically, a wireless access point inside a building works best with devices within a 100
Page view 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 133 134

Comments to this Manuals

No comments