ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)
Basic Installation and Configuration 2-19
v2.0, May 2006
An overview of the information that is required to set up a Security Profile follows—including a
description of the Network Authentication choices that are available:
• Security Profile Name. Use a name that makes it easy to recognize the profile—and to tell
profiles apart. (The default names are Profile1, Profile 2, and so on.) You can enter a value of
up to 32 alphanumeric characters.
• Wireless Network Name (SSID). This is the name of your wireless network. It is set to the
default name of NETGEAR_11a for 802.11a and NETGEAR_11g for 802.11b/g.
Figure 2-12
Note: Only the first profile is enabled by default. The rest of the profiles are disabled
and must be enabled if configured.
Selected Security
Profile
Comments to this Manuals