Netgear WAG302v1 User Manual Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 108
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)
2-10 Basic Installation and Configuration
v2.0, May 2006
ProSafe 802.11a/g Dual Band Wireless Access Point WAG302. If they do not match, no wireless
connection will be made.
Logging In Using the Default IP Address
After you install the WAG302, log in to the wireless access point to configure the basic settings
and the wireless settings. The WAG302 is set, by default, with the IP address of 192.168.0.230
with DHCP disabled.
To log in using the default IP Address:
1. Open a Web browser such as Mozilla Firefox, Internet Explorer or Netscape Navigator.
2. Connect to the WAG302 by entering its default address of http://192.168.0.230 into your
browser.
Note: If you are unable to connect, see Chapter 5, “Troubleshooting.”
Note: The computer you are using to connect to the WAG302 should be configured with
an IP address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0.
Figure 2-7
Page view 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 107 108

Comments to this Manuals

No comments