Netgear PTV2000 User's Guide download pdf (Page 6)

6 | Chapter 1. Getting Started

Push2TV HD TV Adapter for Intel® Wireless Display User Manual

Adapter Cable Connections

The power cord connects to the rear panel of the adapter. Plug the other end of the power

cord into an electrical outlet. The HDMI cable connects to the rear panel as shown:

HDMI

Power

Figure 2. Push2TV HD Wireless Adapter cable connections

Connect either the HDMI cable or the audio/video cable, not both. An HDMI cable will

produce higher quality images than an audio/video cable. An HDMI cable is provided in the

package with the Push2TV adapter. (Audio/video cables can be found at electronics stores.)

If you use an audio/video cable, match the connectors to the correct colors on the adapter

(yellow, white, and red). Connect each cord and cable into its correct input on the TV. (See

your TV owner’s manual if necessary.) Once the adapter is plugged in, make sure the cords

and cables are pushed all the way into their correct input positions.

Using the composite video cable (the yellow input on the audio/video cable) might cause the

TV image to be off-center. Consult the TV owner’s manual for image adjustment.

Adapter Label

The product label is located on the bottom of the Push2TV HD Wireless Adapter.

Restore Factory Settings button

MAC address

Serial number

Figure 3. Adapter label

1 2 3 4 5 6 7 8 9 10 11 ... 29 30

No comments

Netgear PTV2000 User's Guide Page 6