Netgear PTV2000 User's Guide download pdf (Page 13)

Chapter 2. Wireless Display Settings | 13

Push2TV HD TV Adapter for Intel® Wireless Display User Manual

Adjusting the Sound

Once a connection begins, the laptop’s sound is muted. When the connection ends, the

laptop’s sound is enabled.

Testing the Audio

When the laptop is connected, clicking the Test audio button on the Adapter properties

screen takes you to an audio test screen. If you do not hear audio after clicking the Play

sample button, increase the volume on the TV speakers by using the TV remote.

Global Volume Control

Usually, the laptop’s sound is muted after the laptop is connected to Intel Wireless Display.

Sometimes, however, other applications might automatically turn on the laptop’s sound. This

results in your hearing the same sound from the laptop before hearing it from the TV. To turn

the volume off, click the little speaker icon located on the far right of the taskbar. This brings

up the Global Volume Control pop-up window. Click the speaker icon just below the slider to

mute the laptop’s sound. If the laptop’s sound keeps coming back on, try turning the volume

all the way down using the slider in the pop up window instead of muting. Moving the volume

slider automatically unmutes the laptop’s speakers.

Windows Audio Mixer

Attempting to change audio settings in the Windows Audio Mixer while using the application,

might result in a connection disruption. (Find the Windows Audio Mixer by clicking the Mixer

link in the Global Volume Control window.) Usually the connection is automatically

reestablished. The TV image might flicker during this time. If the connection does not

automatically reestablish, manually reconnect.

Changing the Sound using the Windows Control Panel

To bring up the audio device window click the Start icon, type audio device in the search

field, and press the Enter key. On the Playback tab, make sure the green circle with a check

mark is on local speakers.

Setting Up Autoconnect

You can use this feature to select a Push2TV HD Wireless Adapter that you want the Intel

Wireless Display to try to connect to automatically. This is somewhat similar to selecting a

default printer. Only one adapter at a time can be set as the auto-connect adapter. In

addition, the auto-connect feature can be enabled only after you have successfully

connected the first time and completed the security configuration. Auto-connect is an attempt

to connect, and it could fail in the same ways that a manual connection could fail.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 29 30

No comments

Netgear PTV2000 User's Guide Page 13