Netgear WNR2000 Specifications download pdf (Page 49)

genie Advanced Home

N300 Wireless Router WNR2000v4

The router delivers the following parameters to any LAN device that requests DHCP

information:

• IP address from the range that you have defined

• Subnet mask

• Gateway IP address (the router’s LAN IP address)

• Primary DNS server address (if you entered a primary DNS address on the Internet

Setup screen; otherwise, the router’s LAN IP address)

• Secondary DNS server address (if you entered a secondary DNS address in the Internet

Setup screen)

 To use another device on your network as the DHCP server, or to manually configure

the network settings of all of your computers and devices:

1. Select Advanced > Setup > LAN Setup.

The LAN Setup screen displays.

2. Clear the Use Router as DHCP Server check box.

3. Click the Apply button.

If the DHCP service is not enabled on the router and no other DHCP server is available on

your network, you need to set your computers’ IP addresses manually or your computers are

not able to access the router.

Set Up Address Reservation

When you specify a reserved IP address for a computer or device on the LAN, that computer

or device always receives the same IP address each time it accesses the router’s DHCP

server. Reserved IP addresses should be assigned to computers or servers that require

permanent IP settings.

 To reserve an IP address:

1. Select Advanced > Setup > LAN Setup.

The LAN Setup screen displays.

2. In the Address Reservation section of the screen, click the Add button.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 81 82

No comments

Netgear WNR2000 Specifications Page 49