Netgear WNR2000 Specifications download pdf (Page 30)

genie Basic Settings

N300 Wireless Router WNR2000v4

Wireless clients need to use the passphrase to access the wireless network through the

router.

3. Click the Apply button.

WPA/WPA2 Enterprise

This security option is not for home use but is typically used in a business or enterprise.

WPA/WPA2 Enterprise does not use a passphrase but supports 802.1x authentication, which

requires an internal or external RADIUS server. A Remote Authentication Dial In User

Service (RADIUS) server provides Authentication, Authorization, and Accounting (AAA)

management to grant (or deny) computers access to your wireless network.

WPA/WPA2 Enterprise can support WPA [TKIP] for WPA clients only, WPA2 [AES] for WPA2

clients only, and WPA [TKIP] + WPA2 [AES], which is a combination of TKIP and AES

encryption for both WPA and WPA2 clients. WPA clients are supported at speeds of up to

Mbps only. WPA2 clients are supported at speeds of up 300 Mbps.

WPA/WPA2 Enterprise supports five Extensible Authentication Protocol (EAP) authentication

methods: EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC,

and EAP-SIM.

 To configure WPA/WPA2 Enterprise security:

1. In the Security Options sections of the Wireless Settings screen, select the WPA/WPA2

Enterprise radio button.

2. Select the WPA mode (WPA [TKIP], WPA2 [AES], or WPA [TKIP] + WPA2 [AES]).

3. Type the IP address of the RADIUS server.

The address can be on your LAN on it can be an external address.

4. Enter the port number for the RADIUS server in the range from 1 to 65535 (the default

number is 1812).

5. Type the shared secret, which needs to be between 1 and 128 characters (the default

value is blank).

The shared secret is case-sensitive.

6. Click the Apply button.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 81 82

No comments

Netgear WNR2000 Specifications Page 30