Netgear WNR2000 Specifications download pdf (Page 27)

genie Basic Settings

N300 Wireless Router WNR2000v4

Note: If you use a wireless computer to change the wireless network name

(SSID) or other wireless security settings, you are disconnected

when you click the Apply button. To avoid this situation, use a

computer with a wired connection to access the router.

 To view or change basic wireless settings:

1. On the Basic Home screen, select Wireless to display the Wireless Settings screen.

Note: The screen sections, settings, and procedures are explained in the

following sections.

2. Make any changes that are needed.

3. Click the Apply button.

4. Set up and test your wireless devices and computers to make sure that they can connect

wirelessly. If they do not, check the following:

• Is your wireless device or computer connected to your network or another wireless

network in your area? Some wireless devices automatically connect to the first open

network (without wireless security) that they discover.

• Does your wireless device or computer show up on the Attached Devices screen? If it

does, then it is connected to the network.

• If you are not sure what the network name (SSID) or password is, look on the label on

the back panel of your router.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 81 82

No comments

Netgear WNR2000 Specifications Page 27