Netgear WNDR4500 User Manual download pdf (Page 92)

Advanced Settings

N900 Wireless Dual Band Gigabit Router WNDR4500v2

2. Select Advanced > Advanced Setup > Wireless Repeating Function to display the

Wireless Repeating Function screen.

Scroll to

settings

3. In the Wireless Repeating Function screen (depending on the frequency you want to use),

select the Enable Wireless Repeating Function check box and select the Wireless Base

Station radio button.

4. Enter the MAC address for one or more repeater units.

5. Click Apply to save your changes.

Set Up a Repeater Unit

Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the

wireless connection to the base station.

Note: If you are using the base station with a non-NETGEAR router as the

repeater, you might need to change more configuration settings. In

particular, you should disable the DHCP server function on the

wireless repeater AP.

 To configure the router as a repeater unit:

1. Log in to the router that will be the repeater

. Select Basic > Wireless Settings and

verify that the wireless settings match the base unit exactly. The wireless security option

has to be set to WEP or None.

2. Select Advanced > W

ireless Repeating Function, and select the Enable Wireless

Repeating Function check box and the Wireless Repeater radio button.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 126 127

No comments

Netgear WNDR4500 User Manual Page 92