Netgear WNDR4500 User Manual Page 107
- Page / 127
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Advanced Settings
107
N900 Wireless Dual Band Gigabit Router WNDR4500v2
To turn on Universal Plug and Play:
1. Select Advanced > Advanced Setup > UPnP. The UPnP screen displays.
2. The available settings and information in this screen are:
Turn UPnP On. UPnP can be enabled or disabled for automatic device configuration.
The default setting for UPnP is disabled. If this check box is not selected, the router does
not allow any device to automatically control the resources, such as port forwarding
(mapping) of the router.
Advertisement Period. The advertisement period is how often the router broadcasts its
UPnP information.
This value can range from 1 to 1440 minutes. The default period is 30
minutes. Shorter durations ensure that control points have current device status at the
expense of more network traffic. Longer durations can compromise the freshness of the
device status, but can significantly reduce network traffic.
Advertisement Time to Live. The time to live for the advertisement is measured in hops
(steps) for each UPnP packet sent.
The time to live hop count is the number of steps a
broadcast packet is allowed to propagate for each UPnP advertisement before it
disappears. The number of hops can range from 1 to 255. The default value for the
advertisement time to live is 4 hops, which should be fine for most home networks. If you
notice that some devices are not being updated or reached correctly, it might be
necessary to increase this value.
UPnP Portmap Table. The UPnP Portmap
Table displays the IP address of each UPnP
device that is accessing the router and which ports (internal and external) that device has
opened. The UPnP Portmap Table also displays what type of port is open and whether
that port is still active for each IP address.
3. Click Apply to save your settings.
- Router WNDR4500v2 1
- Trademarks 2
- Contents 3
- Chapter 5 USB Storage 4
- Chapter 6 ReadySHARE Printer 4
- Chapter 7 Security 4
- Chapter 8 Administration 5
- Chapter 9 Advanced Settings 5
- Chapter 10 Troubleshooting 5
- Unpack Your Router 8
- Position Your Router 8
- Hardware Features 9
- Hardware Setup 10
- Back Panel 11
- Getting Started with NETGEAR 13
- Router Setup Preparation 14
- Types of Logins and Access 14
- NETGEAR genie Setup 15
- Upgrade Router Firmware 16
- Manual Method 18
- NETGEAR genie Basic Settings 20
- Internet Setup 21
- Attached Devices 23
- Parental Controls 24
- ReadySHARE USB Storage 24
- Basic Wireless Settings 25
- Region Selection 26
- Wireless Network 26
- 2.4 GHz b/g/n and 5.0 GHz a/n 26
- Security Options Settings 27
- Guest Networks 28
- WPA Encryption 29
- NETGEAR genie Advanced Home 30
- Setup Wizard 31
- WPS Wizard 32
- Setup Menu 33
- WAN Setup 34
- Default DMZ Server 35
- Change the MTU Size 35
- Table 2. Common MTU sizes 36
- To change the MTU size: 36
- LAN Setup 37
- LAN Setup Screen Settings 38
- Address Reservation 39
- QoS for a Router LAN Port 42
- QoS for a MAC Address 43
- USB Storage 45
- USB Drive Requirements 46
- ReadySHARE Access 46
- File-Sharing Scenarios 47
- Basic Settings 48
- To access your USB device: 49
- Add or Edit a Network Folder 50
- USB Storage Advanced Settings 51
- Safely Remove a USB Drive 52
- Media Server Settings 52
- Specify Approved USB Devices 53
- ReadySHARE Cloud 55
- Time Machine 56
- Change the Partition Scheme 60
- 5. Select GUID Partition T 61
- 6. Click OK 61
- ReadySHARE Printer 62
- , select the language 64
- USB Control Center Utility 67
- Control Center Configuration 68
- USB Printer 68
- USB Speaker 69
- Security 70
- To block services: 72
- Schedule Blocking 74
- Administration 76
- Upgrade the Router Firmware 77
- View Router Status 78
- Statistics Button 79
- Connection Status Button 80
- Manage the Configuration File 84
- Set Password 85
- Advanced Wireless Settings 88
- Wireless Repeating Function 89
- Set Up the Base Station 91
- Set Up a Repeater Unit 92
- Remote Computer Access Basics 93
- To set up port forwarding: 97
- Add a Custom Service 98
- Set Up Port Triggering 99
- To set up port triggering: 100
- Dynamic DNS 101
- To set up Dynamic DNS: 102
- Static Routes 103
- To set up a static route: 104
- Remote Management 105
- Universal Plug and Play 106
- USB Settings 106
- Advanced Settings 107
- Traffic Meter 109
- Troubleshooting 110
- Quick Tips 111
- Troubleshooting with the LEDs 112
- LEDs Never Turn Off 113
- Wireless LEDs Are Off 113
- Cannot Log In to the Router 114
- Cannot Access the Internet 114
- Troubleshooting PPPoE 116
- Changes Not Saved 117
- Wireless Connectivity 117
- Supplemental Information 120
- Factory Settings 121
- Technical Specifications 122
- Notification of Compliance 124
- FCC Caution 125
- Industry Canada 125
- Caution: 126
- Avertissement: 126
- Interference Reduction Table 126
Related products and manuals for Routers Netgear WNDR4500
Routers Netgear R6300 User Manual
(135 pages)
(135 pages)
Routers Netgear WNDR4000 User Manual
(104 pages)
(104 pages)
Routers Netgear DG834 Operations Instructions
(142 pages)
(142 pages)
Routers Netgear D6200 User Manual
(162 pages)
(162 pages)
Routers Netgear DGB111G Operations Instructions
(268 pages)
(268 pages)
Routers Netgear R6200 User Manual
(131 pages)
(131 pages)
Routers Netgear WNB1100 User Manual
(122 pages)
(122 pages)
Routers Netgear N300 ROUTER WNR2000 User Manual
(146 pages)
(146 pages)
© 2020, manymanuals.com. All rights reserved. | 2.857 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals