Netgear WNCE3001-100NAS User Manual download pdf (Page 5)

Getting Started

Universal Dual Band WiFi Internet Adapter (WNCE3001)

Hardware Features

Top Panel with LED

The WNCE3001 has one LED, which indicates the power and wireless connection status.

Top panel LED status Activity

Off Unit is not powered on.

Solid red Link quality is poor, based on the link rate, or the USB does not

supply enough power.

Blinking red If the LED blinks red at the rate of 0.5 seconds on, 0.5 seconds

off, the firmware is corrupt.

Solid amber Link quality is fair, based on the link rate.

Blinking amber System is booting up, or has been reset. The LED starts to blink

amber after the Reset button has been pressed for more than 5

seconds. The LED also blinks amber during a firmware upgrade.

Solid green Unit is powered on, and the link quality is good, based on the link

rate.

Blinking green Boot-up is complete, but no wireless connection is established,

so no IP address is obtained.

Rear Panel

Ethernet port

Reset

button

WPS

button

USB port

Figure 2. Rear panel

1 2 3 4 5 6 7 8 9 10 ... 26 27

No comments

Netgear WNCE3001-100NAS User Manual Page 5