Netgear WNCE3001-100NAS User Manual download pdf (Page 18)

Advanced Settings

Universal Dual Band WiFi Internet Adapter (WNCE3001)

 To check for firmware and upgrade if it is available:

1. From the Internet adapter menu at http://www.mywifiext.net, under Maintenance, select

Firmware Upgrade. The following screen displays:

2. Click Check to see if new firmware is available. If it is, follow the onscreen prompts to

download it onto your computer.

3. Use the Browse field to locate and select the new firmware.

4. Click Upload to install the new firmware on your Internet adapter.

CAUTION:

Once you start the firmware upgrade, do not try to go online, turn off the

Internet adapter, shut down the computer, or do anything else to the

Internet adapter until it finishes restarting!

Advanced Wireless Settings

CAUTION:

The Internet adapter is already configured with the optimum settings. Do

not alter these settings unless directed by NETGEAR support. Incorrect

settings might degrade the wireless performance of the Internet adapter.

 To view or change the advanced wireless settings:

From the Internet adapter menu at http://www.mywifiext.net, under Advanced, select

Wireless Settings. The following screen displays:

You can view or configure the following settings:

• Fragmentation Length (256-2346): This is the maximum packet size used for

fragmentation. Packets larger than the size programmed in this field are fragmented.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 26 27

No comments

Netgear WNCE3001-100NAS User Manual Page 18