Netgear WNCE3001-100NAS User Manual download pdf (Page 17)

Advanced Settings

Universal Dual Band WiFi Internet Adapter (WNCE3001)

Restore Settings

1. On the Backup Settings screen, click Browse.

2. Locate and select the previously saved backup file.

3. Click Restore.

A screen displays letting you know that the device has been successfully restored to the

previous settings. The Internet adapter restarts. This takes about 1 minute.

CAUTION:

Do not try to go online, turn off the Internet adapter, shut down the

computer, or do anything else to the Internet adapter until it finishes

restarting!

4. Close the message window.

To restore your settings from a saved configuration file, enter the full path to the file on your

computer, or click Browse to browse to the file. When you have located it, click Restore to

send the file to the Internet adapter. The Internet adapter then reboots automatically.

Erase the Settings

Under some circumstances (for example, if you have lost track of the changes that you made

to the Internet adapter settings), you might want to erase the configuration. After an erase,

the Internet adapter returns to its factory settings (see Factory Settings on page 23).

To erase the configuration, click the Erase button in the Backup Settings screen.

CAUTION:

Do not try to go online, turn off the Internet adapter, shut down the

computer, or do anything else to the Internet adapter until it finishes

restarting!

Upgrade the Firmware

Unless you changed the settings in the Firmware Upgrade screen previously, the Internet

adapter is set up to check for new firmware automatically at login.

If you do not want to use the automatic firmware check, clear the Check for new version

upon Login check box.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 26 27

No comments

Netgear WNCE3001-100NAS User Manual Page 17